What are the characteristics of water wheel rotary transfer machine

water wheel rotary transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html

water wheel rotary transfer machine is the abbreviation of digital control machine tool, is an automatic machine tool equipped with program control system. The control system can logically process and decode programs with control codes or other symbolic instructions, so as to make the machine move and process parts.

CNC lathe is one of the most widely used water wheel rotary transfer machines at present. It is used for cutting the inner and outer cylindrical surface of shaft parts or disk parts, the inner and outer conical surface of cone Angle, complex rotary inner and outer surface and cylinder, taper thread, etc., and can be used for grooving, drilling, reaming, reaming and boring. water wheel rotary transfer machine customization is to automatically process the machined parts according to the pre-prepared processing program. The machining process route, process parameters, tool movement track, displacement, cutting parameters and auxiliary functions of the parts are written into a machining program sheet according to the instruction code and program format prescribed by the water wheel rotary transfer machine, and then the contents of the program sheet are recorded on the control medium. Then input into the water wheel rotary transfer machine numerical control device, so as to direct the machine to process parts.

Numerical control technology is also called computer numerical control technology, it is the use of computers to achieve digital program control technology. This technique uses the computer to perform the function of controlling the motion trajectory of the equipment and the operation sequence logic of peripherals according to the control program stored in advance. Due to the use of computer to replace the original numerical control device composed of hardware logic circuit, the storage, processing, calculation, logic judgment and other control functions of input operation instructions can be completed by computer software, processing generated micro instructions are transmitted to the servo drive device to drive the motor or hydraulic actuator to drive the equipment to run.

Since the advent of CNC lathes in the 1950s, due to the single piece production, small batch production, the use of CNC lathes to process complex shaped parts, not only improve labor productivity and processing quality, but also shorten the production preparation cycle and reduce the technical proficiency of workers. water wheel rotary transfer machine customization has become a good development direction to achieve technological innovation and technological revolution in single-piece and small-batch production. Countries around the world are also vigorously developing this new technology.

water wheel rotary transfer machine Customized water wheel rotary transfer machine Compared with ordinary machine tools, water wheel rotary transfer machine has the following characteristics: good processing accuracy, with stable processing quality; Can carry out multi-coordinate linkage, can process the shape of complex parts; When machining parts change, generally only need to change the numerical control program, which can save production preparation time; The accuracy of the machine itself is good, the rigidity is large, the processing amount can be selected favorably, and the productivity is good (generally 3 to 5 times that of ordinary machine tools); High degree of machine automation, can reduce labor intensity; The quality requirements of the operator are high, and the technical requirements of the maintenance personnel are high.

water wheel rotary transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html


chelseafansclubcom

17 Blog posts

Comments